 Council of Logistics Engineering Professionals |
| LOGISTICS - SELECTED BIBLIOGRAPHY Based on a list prepared by Ben S. Blanchard, Virginia Tech,
Blacksburg, Virginia 24060 1. Logistics, Supply Chain Management, and Supportability. 2. Systems, Systems Analysis, and Systems Engineering. 3. Concurrent and Simultaneous Engineering. 4. Software and Computer-Aided Systems. 5. Reliability Engineering. 6. Maintainability Engineering and Maintenance. 7. Human Factors, Safety, and Security Engineering. 8. Production, Manufacturing, Quality Control and Assurance. 9. Operations Research and Operations Management. 10. Engineering Economy and Life-Cycle Cost Analysis. 11. Management and Supporting Areas.
1. Logistics, Supply Chain Management, and Supportability
1. Ayers, J.B., Handbook of Supply Chain Management, Saint Lucie Press, 2000 (ISBN 1574442732). 2. Ballou, R.H., Business Logistics Management: Planning, Organizing, and Controlling the Supply Chain, 5th Ed., Prentice Hall, Upper Saddle River, NJ, 2003 (ISBN 0130661848). 3. Blanchard, B.S., Logistics Engineering and Management, 6th Ed., Prentice Hall, Upper Saddle River, NJ, 2004 (ISBN 0131429159). 4. Bowersox, D.J., Supply Chain Logistical Management, 2nd Ed., McGraw-Hill, New York, NY, 2005 (ISBN 9780072947885). 5. Chopra, S. and P. Meindl, Supply Chain Management, 2nd Ed., Prentice Hall, Upper Saddle River, NJ, 2003 (ISBN 013101028X). 6. Council of Supply Chain Management Professionals (CSCMP), Logistics Comment, CSCMP Newsletter, 2805 Butterfield Rd., Suite 200, Oak Brook, IL 60523. 7. Council of Supply Chain Management Professionals (CSCMP), Annual Conference Proceedings, CSCML, 2805 Butterfield Rd., Suite 200, Oak Brook, IL 60523. 8. Council of Supply Chain Management Professionals (CSCMP), Journal of Business Logistics, CSCMP, 805 Butterfield Rd., Suite 200, Oak Brook, IL 60523. 9. Coyle, J.J., E.J. Bardi, and R.A. Novack, Transportation, 5th Ed., South-Western Publisher, St. Paul, MN, 2000 (ISBN 0538881801). 10. Coyle, J.J., E.J. Bardi, and C.J. Langley, The Management of Business Logistics, 7th Ed., South-Western Publisher, Mason, OH, 2003 (ISBN 032007515). 11. DOD, Designing and Assessing Supportability in DOD Weapon Systems: A Guide to Increased Reliability and Reduced Logistics Footprint, Department of Defense,Washington DC, 2003. 12. Frazelle, E.H., Supply Chain Strategy: The Logistics of Supply Chain Management, McGraw-Hill, New York, NY, 2002 (ISBN 0-07-137599-6). 13. Frohne, P.T., Quantitative Measurements for Logistics, McGraw-Hill and SOLE Press, New York, NY, 2008 (ISBN 9780071494151). 14. Jones, J.V., Integrated Logistics Support Handbook, 3rd Ed., McGraw-Hill Professional and SOLE Press, New York, NY, 2006 (ISBN 0071471685). 15. Jones, J.V., Supportability Engineering Handbook: Implementation, Measurement, and Management, McGraw-Hill and SOLE Press, New York, NY, 2007 (ISBN 139780071475730). 16. Langford, J.W., Logistics: Principles and Applications, 2nd Ed., McGraw-Hill Professional and SOLE Press, New York, NY, 2007 (ISBN 139780071472241). 17. MIL-HDBK-502, Department of Defense Handbook on Acquisition Logistics, Department of Defense, Washington, D.C., 1997. 18. MIL-PRF-49506, Performance Specification, Logistics Management Information, Department of Defense, Washington, D.C. (latest edition). 19. Reliability Information Analysis Center (RIAC), Supportability Toolkit, Prepared by Blanchard, B.S. and J.W. Langford for RIAC, 6000 Flanagan Rd., Suite 3, Utica, NY 13502-1348, 2005 (ISBN 0-9741979-3-9). 20. SOLE-The International Society of Logistics, Logistics Spectrum, Quarterly Journal, SOLE, 8100 Professional Place, Suite 111, Hyattsville, MD 20785 (ISSN 00245852). 21. SOLE-The International Society of Logistics, Annual Symposium Proceedings, SOLE, 8100 Professional Place, Suite 111, Hyattsville, MD 20785. 22. Supply Chain Management Review, published by Reed Business Information, Reed Elsevier, 225 Wyman St., Waltham, MA 02451 (published bi-monthly). 23. Taylor, G.D., Editor, Logistics Engineering Handbook, CRC Press, Boca Raton, FL, 2008 (ISBN 084933053X). 24. U.S. Air Force, Air Force Journal of Logistics, Quarterly Journal, Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.
2. Systems, Systems Analysis, and Systems Engineering
1. ANSI/GEIA EIA-632, Processes for Engineering a System, Electronic Industries Alliance (EIA), Arlington, VA, September 2003 2. Blanchard, B.S., System Engineering Management, 3rd Ed., John Wiley & Sons, Hoboken, NJ, 2004 (ISBN 0471190861). 3. Blanchard, B.S. and W.J. Fabrycky, Systems Engineering and Analysis, 4th Ed., Prentice Hall, Upper Saddle River, NJ, 2006 (ISBN 0131869779). 4. Boyd, D.W., Systems Analysis and Modeling: A Macro-Micro Approach With Multidisciplinary Applications, Academic Press, San Diego, CA, 2001 (ISBN 0121218511). 5. Buede, D.M., The Engineering Design of Systems: Models and Methods, John Wiley & Sons, Hoboken, NJ, 2000 (ISBN 0-471-28225-1). 6. DAU, Systems Engineering Fundamentals, Defense Acquisition University (DAU) Press, Fort Belvoir, VA 22060-5565, December 2000. 7. Eisner, H., Essentials of Project and Systems Engineering Management, 2nd Ed., John Wiley & Sons, Hoboken, NJ, 2002 (ISBN 0471148466). 8. GEIA EIA-731-1, Systems Engineering Capability Maturity Model (SECM), Electronic Industries Alliance (EIA), Arlington, VA, August 2002. 9. GEIA EIA-731-2, Systems Engineering Capability Model Appraisal Method, Electronic Industries Alliance (EIA), Arlington, VA, August 2002. 10. Grady, J.O., System Engineering Deployment, CRC Press, Boca Raton, FL, 2000 (ISBN 0849378397). 11. IEEE 1220-1998, Standard for Application and Management of the Systems Engineering Process, Institute of Electrical and Electronics Engineers (IEEE), 345 East 47th St., New York, NY 10017, 1998. 12. IEEE 1233-1998, IEEE Guide for Developing System Requirements Specifications, Institute of Electrical and Electronics Engineers (IEEE), 345 East 47th St., New York, NY 10017, 1998 (ISBN 0738103373). 13. INCOSE-The International Council on Systems Engineering, Systems Engineering, Quarterly Journal, published by John Wiley & Sons, Hoboken, NJ, 14. INCOSE-The International Council on Systems Engineering, INSIGHT, Quarterly Newsletter, INCOSE, 2150 N. 107th St., Suite 205, Seattle, WA 98133-9009. 15. INCOSE-TP-2003-016-02, Systems Engineering Handbook, International Council on Systems Engineering (INCOSE), 2150 N. 107th St., Suite 205, Seattle, WA 98133-9009, Version 3, June 2006 (INCOSE-TP-2003-002-03). 16. ISO/IEC-15288, Systems Engineering - Systems Life-Cycle Processes, ISO, Geneva, Switzerland, 2002. 17. ISO/IEC-19760, A Guide for the Application of ISO/IEC-15288 System Life-Cycle Processes, 2004. 18. Kossiakoff, A. and W. Sweet, Systems Engineering: Principles and Practice, John Wiley & Sons, Hoboken, NJ, 2003 (ISBN 0471234435). 19. Maier, M.W. and E. Rechtin, The Art of Systems Architecting, 2nd Ed., CRC Press, Boca Raton, FL, 2000 (ISBN 0849304407). 20. Martin, J.N., Systems Engineering Guidebook: A Process for Developing Systems and Products, CRC Press, Boca Raton, FL, 1996 (ISBN 0849378370). 21. Pugh, S., Total Design: Integrated Methods for Successful Product Engineering, Addison-Wesley Publishing, Reading, MA, 1991 (ISBN 100201416395). 22. Sage, A.P., Systems Engineering, John Wiley & Sons, Hoboken, NJ, 1992 (ISBN 0471536393). 23. Sage, A.P. and W.B. Rouse (Editors), Handbook of Systems Engineering and Management, John Wiley & Sons, Hoboken, NJ, 1999 (ISBN 0471154059). 24. Sage, A.P. and J.E. Armstrong, Introduction to Systems Engineering, John Wiley & Sons, Hoboken, NJ, 2000 (ISBN 0-471-02766-9). 25. Sandquist, G.M., Introduction to System Science, Prentice Hall, Upper Saddle River, NJ, 1885 (ISBN 013498692X). 26. Wasson, C. S., System Analysis, Design, and Development: Concepts, Principles, and Practices, John Wiley & Sons, Hoboken, NJ, 2006 (ISBN 13 978-0-471-39333-7). 27. Young, R.R., Effective Requirements Practices, Addison-Wesley Publishing, Reading, MA, 2001 (ISBN 100201709120).
3. Concurrent and Simultaneous Engineering 1. Anderson, D.M., Design for Manufacturability and Concurrent Engineering, CIM Press, 2003 (ISBN 1878072234). 2. Hartley, J.R., Concurrent Engineering: Shortening Lead Times, Raising Quality, and Lowering Costs, Productivity Press, Portland, OR, 1998 (ISBN 1563271893). 3. Prasad, B., Concurrent Engineering Fundamentals: Integrated Product Development, Prentice Hall, Upper Saddle River, NJ, 1997 (ISBN 0133969460). 4. Shina, S.G. (Editor), Successful Implementation of Concurrent Engineering Products and Processes, John Wiley & Sons, Hoboken, NJ, 1994 (ISBN 0471285102).
4. Software and Computer-Aided Systems 1. Boehm, B.W., Software Engineering Economics, Prentice Hall, Upper Saddle River, NJ, 1981 (ISBN 100138221227). 2. Crosstalk-The Journal of Defense Software Engineering, published by the Software Technology Support Center (STSC), 00-ALC/MAS, 6022 Fir Ave., Building 1238, Hill AFB, UT 84056-5820 (monthly). 3. IEEE/EIA-12207, Information Technology-Software Life-Cycle Processes, Defense Automated Printing Services, Building 4/D, 700 Robins Ave., Philadelphia, PA 19111-5094. 4. ISO/IEC 15939, Software Engineering-Software Measurement Process, 2002. 5. Jones, C., Software Assessments, Benchmarks, and Best Practices, Addison Wesley Longman, Reading, MA, 2000. 6. Leach, R., Introduction to Software Engineering, CRC Press, Boca Raton, FL, 1999 (ISBN 0-8493-1445-3). 7. McConnell, S., Software Project Survival Guide, Microsoft Press, Redmond, WA,1998 (ISBN 1-57231-621-7). 8. Moore, J.W., The Roadmap to Software Engineering: A Standards-Based Guide, Wiley IEEE Computer Society Press, Los Alamitos, CA, 2006 (ISBN 100471683620). 9. Pressman, R.S., Software Engineering: A Practitioner's Approach, 6th Ed., McGraw-Hill, New York, NY, 2005 (ISBN 0072853182). 10. Sage, A.P. and J.D. Palmer, Software Systems Engineering, John Wiley & Sons, Hoboken, NJ, 1990 (ISBN 047161758X). 11. Sage, A.P., Systems Management for Information Technology and Software Engineering, John Wiley & Sons, Hoboken, NJ, 1995 (ISBN 0471015830). 12. Shih, R.H., Parametric Modeling With Autodesk Inventor 2008, Software Development Corp., Mission, KS, 2007 (ISBN 9781585033713). 13. Wiegers, K.E., Software Requirements, 2nd Ed., Microsoft Press, Redmond, WA, 2003 (ISBN 100735618798).
5. Reliability Engineering
1. Annual Reliability and Maintainability Symposium (RAMS), Proceedings, Sponsored by 10 Technical Societies, Scien-Tech Associates, Inc., P.O. Box 2097, Banner Elk, NC 28604-2097. 2. Barlow, R.E., Engineering Reliability (Statistics and Applied Probability), Society of Industrial & Applied Mathematics, New York, NY, 1998 (ISBN 0898714052). 3. Dhillon, B.S., Reliability, Quality, and Safety for Engineers, CRC Press, P.O. Box 409267, Atlanta, GA 30384, 2005 (ISBN 0-8493-3068-8). 4. Dodson, B. and D. Nolan, Reliability Engineering Handbook, CRC Press, Boca Raton, FL, 1999 (ISBN 100824703642) 5. Ebeling, C.E., An Introduction to Reliability and Maintainability Engineering, McGraw-Hill, New York, NY, 1997 (ISBN 0070188521). 6. Institute of Electrical and Electronics Engineers (IEEE), IEEE Transactions on Reliability, published quarterly, IEEE, P.O. Box 1331, Piscataway, NJ 08854-1331 (ISSN 00189529). 7. IEEE 1332-1998, IEEE Standard Reliability Program for Development and Production of Electronic Systems and Equipment, Institute of Electrical and Electronics Engineers (IEEE), 345 East 47th St., New York, NY 10017, 1998. 8. IEEE 1413-1998, IEEE Standard Methodology for Reliability Predictions and Assessment for Electronic Systems and Equipment, Institute of Electrical and Electronics Engineers (IEEE), 345 East 47th St., New York, NY 10017, 1998. 9. Ireson, W.G. (Editor), Handbook of Reliability Engineering and Management, 2nd Ed., McGraw-Hill, New York, NY, 1996 (ISBN 0070127506). 10. Knezevic, J., Reliability, Maintainability, and Supportability: A Probabilistic Approach, McGraw-Hill, London, UK, 1993 (ISBN 0-07-707423-8). 11. Musa, J.D., Software Reliability Engineering: More Reliable Software, Faster Development and Testing, McGraw-Hill, New York, NY, 1998 (ISBN 0079132715). 12. Nachlas, J.A., Reliability Engineering: Probabilistic Models and Maintenance Methods, CRC Press, P.O. Box 409267. Atlanta, GA 30384, 2005 (ISBN 0-8493-3598-1). 13. Nikolaidis, E, D.M. Ghiocel, and S. Singhal, Engineering Design Reliability Handbook, CRC Press, P.O. Box 409267, Atlanta, GA 30384, 2005 (ISBN 0-8493-1180-2). 14. O'Connor, P.D.T., D. Newton, and R. Bromley, Practical Reliability Engineering, 4th Ed., John Wiley & Sons, Hoboken, NJ, 2002. 15. RIAC, Handbook of 217Plus Reliability Prediction Models, Reliability Information Analysis Center (RIAC), 6000 Flanagan Road, Suite 3, Utica, NY 13502, 2006. 16. RIAC, System Reliability Toolkit: A Practical Guide for Understanding and Implementing a Program for System Reliability, Reliability Information Analysis Center (RIAC), 6000 Flanagan Road, Suite 3, Utica, NY 13502, 2005, (ISBN-10-1-933904-00-3). 17. Smith, D.J., Reliability, Maintainability, and Risk, 6th Ed., Butterworth-Heinemann, Woburn, MA, 2001 (ISBN 0750651687).
6. Maintainability Engineering and Maintenance 1. Blanchard, B.S., D. Verma, and E.L. Peterson, Maintainability: A Key to Effective Serviceability and Maintenance Management, John Wiley & Sons, Hoboken, NJ, 1995 (ISBN 0471591327). 2. Dhillon, B.S., Engineering Maintenance, CRC Press, P.O. Box 409267, Atlanta GA 30384, 2002 (ISBN 1-58716-142-7). 3. Dhillon, B.S., Maintainability, Maintenance, and Reliability for Engineers, CRC Press, P.O. Box 409267, Atlanta, GA 30384, 2006 (ISBN 0-8493-7243-7). 4. Knezevic, J., Systems Maintainability: Analysis, Engineering, and Management, Chapman and Hall, London, UK, 1997 (ISBN 0412802708). 5. Maintenance Steering Group 3 Task Force, Operator/Manufacturer Schedule Maintenance Development, Air Transport Association (ATA) of America, Washington, DC, April 2001 (http://www.airlines.org). 6. Moubray, J., Reliability-Centered Maintenance, 2nd Ed., Industrial Press, Boca Raton, FL, 1997 (ISBN 0831130784). 7. Nakajima, S., Introduction to TPM: Total Productive Maintenance, Productivity Press, Portland, OR, 1994 (ISBN 0915299232). 8. Nyman, D. and J. Levitt, Maintenance Planning, Scheduling, and Coordination, Industrial Press, Boca Raton, FL, 2002 (ISBN 0831131438). 9. Reliability Information Analysis Center (RIAC), Maintainability Toolkit: A Practical Guide for Designing and Developing Maintainable Products and Systems, RIAC, 6000 Flanagan Rd., Suite 3, Utica, NY 13502-1348, 2000. 10. Willmott, P. and D. McCarthy, Total Productive Maintenance: A Route to World-Class Performance, Butterworth-Heinemann, Woburn, MA, 2001 (ISBN 0750644478). 11. Wireman, T., Total Productive Maintenance, 2nd Ed., Industrial Press, Boca Raton, FL, 2003 (ISBN 0831131721).
7. Human Factors, Safety, and Security Engineering
1. Bahr, N.J., System Safety Engineering and Risk Assessment: A Practical Approach, Taylor & Francis, New York, NY, 1997 (ISBN 1560324163). 2. Booher, H.R., Handbook of Human Systems Integration, Wiley-Interscience, Hoboken, NJ, 2003 (ISBN 0471020532). 3. Chapanis, A., Human Factors in Systems Engineering, John Wiley & Sons, Hoboken, NJ, 1996 (ISBN 0-471-13782-0) 4. GEIA HEB 1, Human Engineering - Principles and Practices, Government Electronics and Information Technology Association (GEIA), June 2002. 5. Kroemer, K.H.E., H.J. Kroemer, and K.E. Kroemer-Elbert, Ergonomics, 2nd Ed., Prentice Hall, Upper Saddle River, NJ, 2001 (ISBN 0137524781). 6. Roland, H.E. and B. Moriarity, System Safety Engineering and Management, 2nd Ed., John Wiley & Sons, Hoboken, NJ, 1990 (ISBN 0471618160). 7. Salvendy, G. (Editor), Handbook of Human Factors and Ergonomics, 3rd Ed., John Wiley & Sons, Hoboken, NJ, 2006 (ISBN 100471449172). 8. Sanders, M.S. and E.J. McCormick, Human Factors in Engineering and Design, 7th Ed., McGraw-Hill, New York, NY, 1993 (ISBN 007054901X). 9. Wickens, C.D., J. Lee, Y.D. Liu, and S. Gordon-Becker, An Introduction to Human Factors Engineering, Prentice Hall, Upper Saddle River, NJ, 2003 (ISBN 0131837362). 10. Warkentin, M. and R Vaughn, Enterprise Information Systems Assurance and System Security: Managerial and Technical Issues, IGI Publishing, Hershey, PA, 2006 (ISBN 159140911X). 11. Woodson, W.E., P.Tillman, and B. Tillman, Human Factors Design Handbook, 2nd Ed., McGraw-Hill, New York, NY, 1992 (ISBN 100070717680).
8. Production, Manufacturing, Quality Control and Assurance 1. Breyfogle, F.W., J.M. Cupello, and B. Meadows, Managing Six Sigma: A Practical Guide to Understanding, Assessing, and Implementing the Strategy that Yields Bottom-Line Success, John Wiley & Sons, Hoboken, NJ, 2000 (ISBN 0471396737). 2. Cohen, L., Quality Function Deployment: How to Make QFD Work for You, Addison-Wesley, Reading, MA, 1995 (ISBN 0201633302). 3. Evans, J.R. and J.W. Dean, Total Quality Management, Organization, and Strategy, 3rd Ed., Thomson/South-Western, Mason, OH, 2002 (ISBN 0324178719). 4. Fowlkes, W.Y. and C.M. Creveling, Engineering Methods for Robust Design: Using Taguchi Methods in Technology and Product, Addison-Wesley, Reading, MA,1995 (ISBN 0201633671). 5. Fryman, M., Quality and Process Improvement, Delmar Learning Publishers, New York, NY, 2001 (ISBN 0766828727). 6. Gaal, A., ISO 9001:2000 for Small Business: Implementing Process Approach in Quality Management, St. Lucie Press, Boca Raton, FL, 2001 (ISBN 1574443070). 7. George, M., D. Rowlands, and W. Kastle, What is Lean Six Sigma, McGraw Hill, New York, NY, 2004 (ISBN 0-07-142668-X). 8. Gradel, T.E. and B.R. Allenby, Industrial Ecology, 2nd Ed., Prentice Hall, Upper Saddle River, NJ, 2003 (ISBN 0130467138). 9. Juran, J.M. and G.A. Blanton (Editors), Juran's Quality Control Handbook, 5th Ed., McGraw-Hill, New York, NY, 1998 (ISBN 10007034003X). 10. Hoyle, D., ISO 9000 Quality Systems Development Handbook: A Systems Engineering Approach, Butterworth-Heinemann, New York, NY, 1998 (ISBN 0750625627). 11. ISO 9000, Quality Management Systems - Fundamentals and Vocabularly, International Organization for Standards (IS0), December 2000. 12. ISO 9001, Quality Management Systems - Requirements, International Organization for Standards (ISO), December 2000. 13. ISO 9004, Quality Management Systems - Guidelines for Performance Improvements, International Organization for Standards (ISO), December 2000. 14. ISO 14001, Environmental Management Systems -- Specific Guidance for Use, International Organization for Standards (ISO), September 1996. 15. Journal of Industrial Ecology, published by the International Society for Industrial Ecology (ISIE), MIT Press, Cambridge, MA (ISSN 1088-1980). 16. Lowenthal, J.N., Six Sigma Project Management: A Pocket Guide, ASQ Quality Press, Milwaukee, WI, 2001 (ISBN 0873895193). 17. Madu, C.N. (Ed.), Handbook of Environmentally Conscious Manufacturing, Kluwer Academic Publishers, New York, NY, 2001 (ISBN 0792384490). 18. McMahon, C. and J. Browne, CADCAM: Principles, Practice and Manufacturing Management, 2nd Ed., Addison-Wesley, Reading, MA, 1998 (ISBN 0201178192). 19. Montgomery, D.C, Introduction to Statistical Quality Control, 5th Ed., John Wiley & Sons, Hoboken, NJ, 2005. 20. Moody, J.A., W.L. Chapman, F.D. Van Voorhees, and A.T. Bahill, Metrics and Case Studies for Evaluating Engineering Designs, Prentice Hall, Upper Saddle River, NJ, 1997 (ISBN 0137398719). 21. Reliability Information Analysis Center (RIAC), Quality Toolkit, RIAC, 6000 Flanagan Rd, Suite 3, Utica, NY 13502-1348 (ISBN 0-9712853-7-3). 22. Revelle, J.B., J.W. Moran, and C. Cox, The QFD Handbook, John Wiley & Sons, Hoboken, NJ, 1997 (ISBN 0471173819). 23. Revelle, J.B., Manufacturing Handbook of Best Practices: An Innovation, Productivity, and Quality Focus, St. Lucie Press, Boca Raton, FL, 2001 (ISBN 1574443003). 24. Roy, R.K., Design of Experiments Using the Taguchi Approach: 16 Steps to Product and Process Improvement, John Wiley & Sons, Hoboken, NJ, 2001 (ISBN 0471361011). 25. Smith, G.M., Statistical Process Control and Quality Improvement, 4th Ed., Prentice Hall, Upper Saddle River, NJ, 2001 (ISBN 0130255637). 26. Swamidass, P.M. (Ed.), Innovations in Competitive Manufacturing, American Management Association (AMACOM), Boston, MA, 2002 (ISBN 0-7923-7896-2).
9. Operations Research and Operations Management
1. Fabrycky, W.J., P.M. Ghare, and P.E. Torgersen, Applied Operations Research and Management Science, Prentice Hall, Upper Saddle River, NJ, 1984 (ISBN 013041459X). 2. Hall, R.W., Queuing Methods for Service and Manufacturing, Prentice Hall, Upper Saddle River, NJ, 2001. 3. Hillier, F.S. and G.J. Lieberman, Introduction to Operations Research, 8th Ed., McGraw-Hill, New York, NY, 2005 (ISBN 100073211141). 4. Krajewski, L.J. and L.P. Ritzman, Operations Management: Strategy and Analysis, 5th Ed., Addison-Wesley, Reading, MA, 1998 (ISBN 0201331187). 5. Russell, R.S. and B.W. Taylor, Operations Management, 4th Ed., Prentice Hall, Upper Saddle River, NJ, 2002 (ISBN 0130348341). 6. Stevenson, W.J., Operations Management, 8th Ed., McGraw-Hill, Boston, MA, 2005 (ISBN 0 072869089).
7. Taha, H.A., Operations Research: An Introduction, 8th Ed., Prentice Hall, Upper Saddle River, NJ, 2006.
10. Engineering Economy and Life-Cycle Cost Analysis 1. Blank, L. and A. Tarquin, Engineering Economy, 5th Ed., McGraw-Hill, New York, NY. 2002 (ISBN 10072432349) 2. Conkins, G., Activity-Based Cost Management: An Executive's Guide, John Wiley & Sons, Hoboken, NJ, 2001 (ISBN 10047144328X). 3. Sullivan, W.G., E.M. Wicks, and J. Luxhoj, Engineering Economy, 12th Ed., Pearson Prentice Hall, Upper Saddle River, NJ, 2002 (ISBN 100130673382). 4. Fisher, G.H., Cost Considerations in Systems Analysis, American Elsevier Publishing Co., New York, NY, 1971 (ISBN 0444000879). 5. Hicks, D.T., Activity-Based Costing: Making it Work for Small and Mid-Sized Companies, 2nd Ed., John Wiley & Sons, Hoboken, NJ, 1999 (ISBN 100471249599). 6. Thuesen G.J. and W.J. Fabrycky, Engineering Economy, 9th Ed., Prentice Hall, Upper Saddle River, NJ, 2001 (ISBN 0-13-028128-X).
11. Management and Supporting Areas 1. ANSI/GEIA EIA 649-A, National Consensus Standard for Configuration Management, Electronic Industries Alliance (EIA), Arlington, VA April 2004. 2. Camp, R.C., Business Process Benchmarking: Finding and Implementing Best Practices, Quality Resources, Milwaukee, WI, 1995 (ISBN 0873892968). 3. Chaffey, D, E-Business and E-Commerce Management, 3rd Ed., Pearson Prentice Hall, Upper Saddle River, NJ, 2006 (ISBN 100273707523). 4. Chapman, C. and S. Ward, Project Risk Management: Processes, Techniques, and Insights, John Wiley & Sons, Hoboken, NJ, 2003 (ISBN 0470853557). 5. Cleland, D.I., Project Management: Strategic Design and Implementation, 3rd Ed., McGraw-Hill, New York, NY, 1998 (ISBN 007012020X). 6. Corbitt, R.A., Standard Handbook of Environmental Engineering, McGraw-Hill, New York, NY, 1999 (ISBN 0-07-013160-0). 7. D0D 5000.2-R, Mandatory Procedures for Major Defense Acquisition Programs (MDAPS) and Major Automated Information System (MAIS) Acquisition Programs, Office of the Secretary of Defense, The Pentagon, Washington, DC 20301, April 5, 2002. 8. Gibson, J.L., J.H. Donnelly, J.M. Ivancevich, and R. Konopaske, Organizations: Behavior, Structure, and Processes, McGraw-Hill/Irwin, New York, NY, 2003 (ISBN 0-07-252409-X).
9. Gordon, J.R. and S.R. Gordon, Information Systems: A Management Approach, 2nd Ed., Dryden Press, New York, NY, 1998 (ISBN 0030224691). 10. Haimes, Y.Y., Risk Modeling, Assessment, and Management, 2nd Ed., John Wiley & Sons, Hoboken, NJ, 2004 (ISBN 100471240052). 11. Kerzner, H., Project Management: A Systems Approach to Planning, Scheduling, and Controlling, 9th Ed., John Wiley & Sons, Hoboken, NJ, 2005 (ISBN 1004711741879). 12. Lewis, J.P., Fundamentals of Project Management, 2nd Ed., AMACOM, New York, NY, 2002 (ISBN 0814478352). 13. Magrab, E.B., Integrated Product and Process Design and Development: The Product Realization Process, CRC Press, Boca Raton, FL, 1997 (ISBN 0849384834). 14. Smith, P.G. and G.M. Merritt, Proactive Risk Management: Controlling Uncertainty in Product Development, Productivity Press, New York, NY, 2002 (ISBN 100273707523).
Last update: November 1, 2009
|